Beginner Placemats

I have wanted a very specific style of placemats for quite a while. However, I had the hardest time finding placemats I liked.

So I made my own:

This project really isn't complicated. All marking, cuts, and stitches are in straight lines. I don't sew very often (seriously, about 6 times in the last two years), so I'm not the best seamstress around. I think this project is very user friendly.
What you'll need:

1 yard of two different fabrics
2 yards of sew-in interfacing
Thread
Yardstick
Tissue paper (I just used giftwrap-type tissue paper)
Permanent marker
Ink pen
Straight pens (about 2 dozen)
Iron & ironing board*
Shears
Sewing machine

Pre-Steps: (essential to any sewing project)Before you even start measuring, it's important that you iron/press your fabric. This will smooth out any wrinkles so it lays perfectly flat.

Make a small snip parallel to the selvage edge of the fabric. (The selvege is the edge with no printed design, but words like the manufacturer name and style, etc.) Then start ripping. Sometimes, the fabric is skewed. Sometimes the fabric lady isn't very precise in her cutting. The edge that is ripped will be perfectly straight.

************************************************************************

1.) Start layering. Your layers should be (top to bottom) tissue paper, interfacing, two pieces of fabric with wrong sides together.
2.) Cut tissue paper 12.5 inches x 16.5 inches. Lay it over the pieces of fabric and interfacing (make sure everything is aligned, first), then hold it together with straight pens. Cut out the fabric to match the size of the tissue paper. It should look like this:


3.) On 3 sides, measure in 1/4 inch. On one of the longer sides, measure in 1/2 inch. On the 1/2 inch size, mark a "no sew zone" of about 4 inches in the middle. This will allow you to pull it right side out later.

4.) Start sewing the edges. Be sure to follow the lines you drew, or else your placemats will have lopsided edges.

5.) Turn it right side out through the hole you left open.

6.) Iron everything flat.
7.) Stitch up the hole.

Finished Product:

Happy crafting!

Painting Tips

Two of the services I offer through my business are paint consultations and actual painting.

Did you know that paint is the single most affordable way to add value to a home?
But it has to be done correctly.

Here are some general tips for painting:

Always cover flooring, furniture, and anything else you won't want paint to splatter. It's easier and cheaper to lay down plastic or cloth than it is to clean up paint splatter.

Don't wear jewelry.

Wear old clothes and shoes.

Wear latex or neoprene gloves.

If you have long hair, wear a hat or pull it up.

You can cover a wet brush/roller with a plastic bag (grocery store bags work well) to keep the paint from hardening between coats. It will stay wet in the fridge for a couple of days.

Clean brushes right away, but do it in a utility sink. Mineral spirits and acetone-based paint removers can corrode plumbing, drains, and sinks.

Use a ladder. Yes, they're cumbersome to carry around and set up, but if you'll do a better job and put less strain on your back, why not use one?

Thanks for reading! Please "like" my business page on Facebook- Jensen Home Staging and Design, LLC.
Visit my website: www.jensenhomestaging.com

How to: Paint Stripes

This is what our "office" looked like when we bought our house in 2009:
I have wondered many times why the former owners chose such a dark color. Especially when I was painting the roughly 40' tall stairwell... So, it looks really small, right? This room has to wear many hats: an office while my husband was in graduate school, an office for me since I work from home, and a guest bedroom whenever we have company. Initially, we left the color like this and added two desks, a bookcase, and a futon. That just didn't work. The room was so crowded with furniture that it was stressful just to be in there.

Then, I decided to get rid of the futon. We only have overnight guests a handful of times per year-- an air mattress would suffice. I decided to rearrange furniture, replace the wobbly ceiling fan with a bright overhead light, paint, and add chair molding.

This is what it looks like now:

Since taking this picture, I have added a cream sheer, side-swept panel curtain to the window. It was definitely the finishing touch the window needed! Aaron and I stained the desks, which we got unfinished from the Wooden Chair near our house.

And you can see my dog, Maddie, to the left. =)

To me, the whole room looks larger, brighter, and cleaner! This is because of the visual interest created by stripes on the lower portion of the wall.

Here's how I created the stripes:

1.) Paint your main wall color from ceiling to baseboard.

2.) Decide how high you want your chair rail. A chair rail, once installed, should be 30-36 inches from the floor.

3.) Decide how thick you want your stripes. Keep in mind, skinny stripes may look busy and chunky stripes may look bottom heavy. Mine are 10 inches each. To do this, I used a yardstick, a level, and a pencil to mark lines every 10 inches around the room. Then, I drew an X in every other stripe. Finally, I taped INSIDE the lines of the lighter color. Once it was taped, there were 10 open inches in the "to be painted dark" sections, and less space showing between the tape of the main color sections. Once the tape was removed, every stripe was a perfect 10 inches.

4.) Choose your colors. I chose colors from the same swatch, one about three shades darker than the main wall color. Since we will keep this room painted like this until we sell our house, I chose neutral colors. Why paint twice? =)

5.) Choose a good paint! I prefer Behr Premium Plus Ultra (paint & primer in one). It's a little more pricy, but it's generally 1 coat coverage, nice thick paint. Comparably priced is Sherwin Williams. However, I have found Sherwin Williams paints to be runny and splatter a lot. The better your paint, the less physical work you'll have to put into painting.

Thanks for reading! Please be sure to like my business page on Facebook! Jensen Home Staging and Design, LLC.

Check out my website at www.jensenhomestaging.com.